Frequently asked questions about Table Magic:

1 Your instructions say that wrinkles due to packaging will eventually be
   removed by the constant, even pressure of the elastic edge and can be removed
   quickly by placing in the dryer for 60 seconds, but I am worried that the product
   may melt and ruin my dryer, or cause a fire.  What is the longest you recommend and
   at what setting (High, Medium, Low)?

   TableMagic is not flammable, and has been tested full cycle on high temperature,
   but warming the product more than two minutes on high is a waste of electricity.

2. The distance from the edge of my tabletop to the legs is less than 1/2" will 
    TableMagic work for me?

    TableMagic requires at least 3/4" of clearance from the lower edge of your table
    surface to the legs of your table.  Using a tape measure, if the distance from one
    table leg, across the surface of your table to the opposite table leg is less than 53"
    then the standard product is not suited to your application.  Though most four
    legged tables meet this requirement, pedestal tables are obviously best suited, and
    also note that we have other sizes available that will work (click here)

3.  I have a long rectangular table, 48" wide and 84" long, does TableMagic have
     anything for a table this size?

     Yes, (click here)

4.  My atrium table is only 28" diameter, do you offer anything to fit these smaller
     tables?

     Yes, (click here)

CLICK HERE to place your order                                  Return to home page